Clipper Care

Andis ClippersClipper Care is one of the most important yet overlooked procedures when it comes to barbering tools. It is extremely important to have the best clippers and to take proper care of them to ensure consistent haircuts as well as extending their life. I strongly recommend that you own and use three types of clippers on all of your men’s cuts: a detachable blade clipper, an adjustable clipper, and a trimmer. By having these three clippers you will also extend their life buy not using an under powered clipper for certain steps causing it to break down prematurely. Each clipper has it’s purpose and specific uses.

The correct clipper care steps are as follows:

1. After each use brush the hair off of your clippers or clipper blade before hanging it back up or putting the blade back in its case. I like for my customers to see this so they know that I will be using a clean blade on the next customer which means I used a clean blade on them. My favorite clipper brush is a soft bristled clipper brush made by Andis.

2. After brushing your clipper off use the high power Andis Dry Care which will blow off any excess hair stuck on the blades or in between them.

3. When starting a haircut spray your clipper blade with Andis Cool Care. Spray while the clipper is running on the front and back of the blade running the spray back and forth twice. Make sure your customer sees this but also be careful to spray in the opposite direction. The Cool Care spray is a coolant, disinfectant, lubricant, cleaner, and prevents rust all in one. When finished gently wipe off the blade with a soft towel.

4. After using the clipper spray you need to oil your clippers. Place one drop of oil on each part of the blade where you see the metal touching and put two drops across the cutting blade. Turn the clippers on so the oil is distributed evenly throuhout the blade. Avoid over oiling or getting the oil into the motor which will clog it up and slow down or do damage to the motor.

5. At the end of the day use blade care to give your clippers a thorough cleaning. This will get all of the hair out from in between your blades which can slow them down and if wet cause your clippers to rust. Empty just enough of the blade care into a bowl so you can immerse just the tips of the blade into the solution. Turn the clipper on for about 10 seconds and then let all of the excess hair drip out. This solution is a coolant, will prevent rust, deodorizer, decontaminate, lubricant, and cleaner.

Like anything else once you get in the habit of the above clipper care steps you they will become second nature and a part of your day. Your clippers will last longer and cut better resulting in better and consistent haircuts.